Integrated Technology
Integrated Technology
Mumbai, Maharashtra
Send SMS
Send E-mail

ECCO Gliettechnik

Manufacturer of natural fibers under the brand ‘SETRALIT’ – the company also produces a slew of man-made alternatives to ‘molybdenum disulphide’

 

Development of SETRALIT® - fibres was initiated in 1989 by the friction lining industry after replacement of asbestos was required by law. In the years that followed ECCO managed to develop the so-called “Ultrasonic Breakdown”, a method to gain natural

...

Read more

Get CALLBACK

MIPO M 15 Molybdenum Disulfide

MIPO M 15 Molybdenum Disulfide
 
Ask For Price
Product Price:  Get Latest Price

Molybdenum disulphide powder for lubrication and reduction of wear ApplicationAs solid lubricant component in lubricating greases and pastes,in dispersions (aqueous, none-aqueous) and for dry lubrication.Method of useAdd to the lubricant in the usual concentration.Advantage
  • Reduces friction and wear
  • Extreme high load carrying ability
  • Good adherence
  • High lubricity, high separating effect
  • Economical in use
  • Temperature-stable
Yes! I am Interested
Get CALLBACK

MIPO M 5

MIPO M 5
 
Ask For Price
Product Price:  Get Latest Price

Molybdenum disulphide powder for lubrication and reduction of wearApplicationAs solid lubricant component in lubricating greases and pastes, in dispersions (aqueous, none-aqueous) and for dry lubrication.Method of useAdd to the lubricant in the usual concentration. Advantage· Reduces friction and wear· Extreme high load carrying ability· Good adherence· High lubricity, high separating effect· Economical in use Temperature-stable
Yes! I am Interested
Get CALLBACK

Molybdenum Disulfide (MoS2)

Molybdenum Disulfide (MoS2)
 
Ask For Price
Product Price:  Get Latest Price

For decades Molybdenum disulfide (MoS2) has been a successfully used solid lubricant for reducing the adhesion factor and abrasion.Typically used for: Friction lining, greases, pastes, bonded lubricants, suspensions, compounds.
Yes! I am Interested
Get CALLBACK

Setralit NfU/29-1.5 c10

Setralit NfU/29-1.5 c10
 
Ask For Price
Product Price:  Get Latest Price

Setralit® NfU/29-1.5 c10 is a fibrillated hempf fibre, similar to Setralit® NfU/31-2, which is coated with a solid lubircant (Molygold®) . It is a combined additive for brake lining mixtures serving as a process fibre as well as a friction modifier.  
 Mean ValueRange
Density (g/cm³)1,651,55-1,75
Average fibre length (mm)1,100,80-1,40
Specific surface BET (m²/g)*8,07,6-8,4
Bulk volume (ml/100g)1800 
Stamping volume (ml/100g)800 
Moisture content (%)7,86,0-10,0
Ash content (%)**10,09,0-11,0
Amount of fibrils (%)***3525-50
* Neuberechnung durch Messungen der Gasdurchlässigkeit (Blaine-Methode)** Bestimmt durch thermische, gravimetrische Analysen (Luft, 700 °C, 20 °C pro Minute)*** „Fibrillen“ sind Faser-Strukturen mit einem Durchmesser von weniger als 1/3 der Ausgangsfaser
Yes! I am Interested
Get CALLBACK

MIPO AG-FP 3

MIPO  AG-FP 3
 
Ask For Price
Product Price:  Get Latest Price

New innovative solid lubricant combination without MoS2
as alternative to MoS2

Application
As solid lubricant component in lubricating greases and pastes, in dispersions (aqueous, none-aqueous), compounds.

Method of use
Add to the lubricant in the usual concentration.

Advantage· High load-carrying ability· Reduces wear under influence of load and temperature· Controlled, low coefficient of friction· Good corrosion protection,· As replacement for MoS2 and other solid lubricants· Nontoxic Cost-efficient
Yes! I am Interested
Get CALLBACK

MIPO D 1008/3

MIPO D 1008/3
 
Ask For Price
Product Price:  Get Latest Price

MIPO® D 1008/3New innovative solid lubricant combination without MoS2 Application For production of non-asbestos disc pads, brake and clutch linings. Method of useAdd powder to other raw materials and homogenize. Advantage· Reduction of wear and tear under high pressure and temperature· Stabilization of friction coefficient Replacement of MoS2 and other solid lubricants
Yes! I am Interested
Get CALLBACK

MIPO LM 14

MIPO LM 14
 
Ask For Price
Product Price:  Get Latest Price

MIPO® LM 14Dark, new type of solid lubricant with MoS2Application
For production of non-asbestos disc pads, brake and clutch linings, compounds.

Method of use
Add powder to other raw materials and homogenize.

Advantage· Reduction of wear and tear under high pressure and temperature· Stabilization of friction coefficient· Replacement of MoS2 and other solid lubricants· Noise control
Yes! I am Interested
Get CALLBACK

Setralit X6

Setralit X6
 
Ask For Price
Product Price:  Get Latest Price

Quality characteristics of Setralit® X6
 MittelwertBereich
Weight ratio Kevlar®/Setralit®50/50 
Density (g/cm³)1,401,35 – 1,45
Average fibre length (mm)0,930,84 – 0,96
Canadian Standard Freeness (ml)565435 - 630
Specific surface BET (m²/g) *5,85,6 – 6,1
Bulk volume (ml/100g)3.6003.100 – 4.400
Stamping volume (ml/100g)1.320 
Moisture content (%)5,75,5 – 5,9
Ash content (%) **1,4 
Amount of fibrils***2820 – 35
Yes! I am Interested
Get CALLBACK

Setralit X5

Setralit X5
 
Ask For Price
Product Price:  Get Latest Price

Quality characteristics of Setralit® X5
 Mean ValueRange
Weight ratio Kevlar®/Setralit®30/70 
Density(g/cm³)1,381,31 – 1,45
Average fibre length (mm)0,870,83 – 0,97
Canadian Standard Freeness (ml)520440 - 620
Specific surface BET (m²/g) *7,97,6 – 8,1
Bulk volume (ml/100g)3.0502.900 – 3.400
Stamping volume (ml/100g)1.000 
Moisture content (%)4,33,4 – 4,9
Ash content (%) **1,5 
Amount of fibrils ***5040 - 60
Yes! I am Interested
Get CALLBACK

Setralit X4

Setralit X4
 
Ask For Price
Product Price:  Get Latest Price

Quality characteristics of Setralit® X4 
 Mean ValueRange
Weight ratio Kevlar®/Setralit®15/85 
Density (g/cm³)1,371,28 – 1,45
Average fibre length (mm)0,860,84 – 0,88
Canadian Standard Freeness(ml)480475 – 490
Specific surface BET (m²/g) *8,07,9 – 8,2
Bulk volume (ml/100g)3.0502.700 3.300
Stamping volume(ml/100g)1.050 
Moisture content (%)5,24,2 – 5,8
Ash content (%) **1,6 
Amount of fibrils ***5040 - 60
Yes! I am Interested
Explore More Products
X
Find Us Vinod Miya (Director) B-206, The Great Eastern Summit Sector 15, CBD Belapur, Mumbai - 400614, Maharashtra, India
SEND SMS
SEND E-MAIL
Share Us: