Setral Chemie GmbH

• Fine molybdenum-disulphide powder for lubrication and wear reduction. 

• As solid lubricant component in lubricating greases and pastes, in dispersions (aqueous, non-aqueous), sintered metals, plastics (PA 6, PA 6.6 etc.) and as solid lubricant for mechanical elements. 

• Reduces wear and tear 
• Separating and lubricating 
• Highest load carrying ability 
• Wide temperature range 
• Economical in consumption 

Additional Information:

• H1 silicone lubricating grease for a wide application range

Use:

• As assembly lubricant for plastic-sheathed cables to be pulled through cable channels.
• For waterproof electrical connectors, electrical components and terminals.

• For lubrication and sealing of connectors, O-rings, control and pressure regulatingvalves, especially in food and pharmaceutical industries.

Properties:

• H1 registered
• Kosher certified
• Halal certified
• Resistant to cold and hot water, steam
• Outstanding sealing properties
• Excellent oxidation stability
• Agreeable odour
• Tasteless
• Nonvolatile and nonconductive
• Neutral to elastomers, plastics and metals

Additional Information:

• Fully synthetic special grease for long-term lubrication, stable at high temperature and aggressive ambience.

Use:

• Typical applications: Circle conveyors, paint lines, fans, kiln cars, calendars, film stretching machines, extraction plants of textile machines.

• Long term and for-life lubrication of plain and roller bearings and all friction pairings under extreme conditions.

• Excellently suited for lubrication of plastic/plastic and plastic/metal surfaces (automotive).

• Approved and recommended for the lubrication of thermally high loaded bearings on continuous wood-press systems as well as for tire containers.

Properties:

• High load carrying ability
• Excellent wear properties
• Extended relubrication cycles
• Extremely low evaporation rate
• Resistant against chemicals and aggressive media
• Neutral to most plastics and elastomers
• Silicone-free
• Economical in consumption

Additional Information:

• H1 high-temperature grease for long-term lubrication in the food and pharmaceutical industry, particularly at high temperatures and aggressive ambience

Use:

• For long-term or life-time lubrication of rolling and plain bearings and all sliding pairs susceptible to wear under extreme conditions, especially in food and pharmaceutical industries.
• Typical applications: baking ovens, baking lines, guide pulleys of conveyor chains, kiln cars, calendars and other applications e.g. in dairies and beverage filling.

Properties:

• H1 registered
• Kosher certified
• Halal certified
• High load carrying ability
• Excellent wear properties
• Extended relubrication cycles
• Resistant against chemicals and aggressive media
• Resistant to oxidation and ageing
• Economical in consumption

Additional Information:

• High performance cleaner and degreaser, highly effective and fast evaporating

Use:

• For residue-free and deep cleansing and degreasing of bearings, machine parts and injection moulds and tools.
• Ideal as degreaser prior to use of industrial glues. For fast and reliable removal at leftovers of oil, resin, wax and soiling.
• Eliminates slight paint and condensate residues from the pairing line injection moulds.

Properties:

• Evaporates quickly and without residues
• Cleans quickly and efficiently
• Guarantees absolutely clean surfaces
• Significantly better cleaning efficiency compared to brake cleaners
• Economical in consumption

Additional Information:

• Air-drying MoS₂ based dry lubricant

Use:

• Long-term dry lubrication of heavily loaded surfaces.
• Improvement of running-infor tools used during dry-cutting of non-ferrous metals.
• Lubrication of chains, especially in dusty atmosphere.

Properties:

• Clean application
• Reduces wear and tear
• Excellent load carrying ability
• Optimized running-in procedures
• No outgassing in high vacuum
• Avoids stick-slip
• Wide temperature range
• Economical in consumption

Additional Information:

• Cavity cleaner and cold paint stripper

Use:

• Removal of diesel effect, plastic and paint residues on metallic surfaces of tools & moulds in injection moulding machines, extrusion and film lines.

• Removal of all common paints incl. 2K, epoxy, EC and powder coatings.

• Removal of sealing residues on screw joints, lids, flanges and engine blocks.

Properties:

• Clean application
• Evaporates slowly and almost without residues
• Ideal remover of sealings
• Removes even hardest paints
• Solves brownish diesel residues
• Applicable also with galvanized material, aluminum and aluminum alloys
• Economical in consumption

Additional Information

• H1 high performance cleaner and degreaser

Use

• For residue-free cleaning and degreasing of bearings, machine parts and injection moulds/tools.
• Removal of grease, oil, resin, dirt and remains of sealings.
• Typical applications: injection molding, food and pharmaceutical industry, engineering and plant equipment, automotive industry etc.

Note: This high-performance cleaner can be used for applications where technically inevitable contact with food or food packaging may occur.

Properties

• H1 registered
• Kosher certified
• Halal certified
• Evaporates fast and without residues
• Compatible with common plastic materials
• Cleans quickly and efficiently
• Guarantees absolutely clean surfaces
• Agreeable odour
• Economical in consumption

Additional Information:

• Environmental safety cleaner and degreaser

Use:

• For basic cleaning prior to any assembly.
• Degreasing of injection mould, work pieces and machine parts.
• Alternative to environmental harmful cleaners.
• Environmental friendly cleaning, hot/cold, with/without water, e.g. machinery & equipment
• Dewaxing of new vehicles, engines and gear boxes, workshop floors and tools.

Properties:

• Short term corrosion protection
• Trouble-free separation in skimming-tank
• Not water-soluble, fast phase separation
• Free from aromatic compounds

Additional Information:

• Ageing-stable high-performance grease with MoS.

Use:

• Especially developed for use in gear drive shaft/clutch disc-hub (automotive).
• For all kinds of roller and sliding bearings with slow and/or oscillating movements
• under heavy conditions.
• For lubrication of keyway profiles and threaded spindles.

Properties:

• Universal in use
• Reduces wear and tear
• Extended relubrication cycles
• Outstanding emergency running characteristics
• Applicable for almost all bearing types
• Extreme load and shock resistant

Additional Information

Grease-like H1 anticorrosive agent for temporary protection

Use

Especially developed for the temporary preservation of injection moulds and tools for production of plastic parts for the food industry and medical engineering.

Properties

• H1 registered
• Kosher certified
• Halal certified
• Excellent corrosion protection
• Removed completely from injection moulding tools after a few shots
• Extremely water repellent
• Short drying time
• Easy application
• Silicone-free
• Economical in consumption

Additional Information:

• Special grease for electrical contacts, switches and sensors

Use:

• Successfully used for lubrication of plastic/plastic friction pairings like in small gears of electric tooth brushes.

• For lubrication and contact protection of electronic components e.g. in the automotive industry & installation technology.

• Typical applications: power and control power switches,PCB`s and potentiometers.

• Reduces wear and tear
• Excellent corrosion protection
• Extremely water repellent
• Improves contact making
• To a large extent compatible with plastics
• Avoids spark formation
• Resistant to oxidation and ageing

Additional Information

Evaporating stamping and drawing fluid with wear-reducing synthetic additives

Use :

• Drawing, deep-drawing, stamping and folding of sheets and profiles.
• Suitable for steel and nonferrous metals.
• For production of food packagings of tin and aluminum.

Properties

• Reduces wear and tear
• Evaporates quickly
• Evaporates without residues
• Extended lifetime of tools
• Free from heavy metals and their compounds
• Contains no chlorine
• Harmless in application and use
• Subsequent cleaning not necessary
• Paint compatible, suitable for water-based and solvent based paints
• Silicone-free

Additional Information

Fully synthetic special grease for long-term lubrication, stable at high temperature and aggressive ambience.

Use

• For long-term or life-time lubrication of rolling and plain bearings and all sliding pairs susceptible to wear under extreme conditions
• Typical applications: Circle conveyors, paint lines, fans, kiln cars, calendars, film stretching machines, extraction plants of textile machines.
• Excellently suited for lubrication of plastic/plastic and plastic/metal surfaces (automotive).

Properties

• High load carrying ability
• Excellent wear properties
• Extended relubrication cycles
• Extremely low evaporation rate
• Resistant against chemicals and aggressive media
• Neutral to most plastics and elastomers
• Silicone-free
• Economical in consumption

Additional Information

• Grease-like anti-corrosion for temporary protection

Use:

• Especially developed for the temporary preservation of injection moulds and tools.

Properties:

• Excellent corrosion protection
• Removed completely from injection moulding tools after a few shots
• Extremely water repellent
• Short drying time
• Easy application
• Silicone-free
• Economical in consumption

Additional Information:

• White high performance grease for plain and roller bearings

Use:

• For lubrication of rolling and plain bearings in the food and beverage industry (e.g. decanting and packing machinery). A direct contact with the food must be excluded

• Clean application
• Reduces wear and tear
• Excellent corrosion protection
• Extended relubrication cycles
• Highest load carrying ability
• Economical in consumption

Additional Information:

• Light H1 multipurpose grease for food, beverage and pharmaceutical industry

Use:

• Long-term lubrication of rolling and plain bearings, armatures, tap cocks, joints, sliding surfaces, bearings and gears in food and beverage industries.

Properties:

• H1 registered
• Resistant to cold and hot water, alkaline solutions etc.
• Compatible with usual plastic and sealing materials
• Kosher certified
• Halal certified
• Reduces wear and tear
• Excellent corrosion protection
• No gumming
• Neutral to beerfoam - if properly applied
• Very good resistance to ageing

Additional Information

H1 high-temperature grease with very high wear and corrosion protection

Use

• Especially developed for the lubrication of slide and roller bearings, joints, linear guides and other slide surfaces on machines and equipment in the food industry.
• For slide and roller bearings at slow speed, slide bars and friction pairings at high temperatures.

Properties

• H1 registered
• Very high wear and corrosion protection, high load carrying ability
• Compatible with common plastics, elastomers and paints
• Very good adhesion property
• Highly resistant to cold, hot and salt water
• Resistance to load and shock load

Additional Information:

• Multipurpose grease without solids for normal and high-temperature application

Use:

• Maintenance-free lubrication of rolling and plain bearings. For sliding surfaces in high temperature areas, calender bearings, fan bearings and burning ovens

• Excellent corrosion protection
• Highest load carrying ability
• Stable to high temperatures
• Very good wear protection

Additional Information:

• Fully synthetic H1 special grease, free from solid lubricants for long-term lubrication at high temperatures

Use:

• Lubrication of ejector pins, slides, folding units, latch locking units as well as all sliding surfaces in plastic injection moulding tools.
• Especially dedicated for production of all kinds of visible parts and plastic parts/packagings for the food and pharmaceutical industries.

Properties:

• H1 registered
• Kosher certified
• Halal certified
• Approved and recommended from well-known manufacturers worldwide
• Thermally stable up to +300°C at extremely low evaporation rate
• Achievement of high number of shots without relubrication
• Stays in place, no transport on to the plastic parts
• Outgassing substances don't cause stress cracks (DIN 53449)
• Neutral behavior to common elastomers and plastics
• Packing of the injection-moulded parts possible without cleaning
• Stable to aggressive plastic condensates
• Optimal running in properties for new tools

Additional Information

High-pressure grease without solids, with EPL additive technology

Use

• For long-term or lifetime lubrication of rolling, bearings, highly loaded gears and sliding pairs susceptible to wear under extreme conditions, like vibrations or shock loads etc.
• Due to the special EPL additive technology micropitting and pittings are avoided and re-smoothening of surface damages is enabled.
• Typcial applications: shock loaded gear motors, newspaper printing machines, wood milling machines, robots, spindle bearings and other applications in all industrial sectors.

Properties

• Avoids fretting corrosion
• Excellent corrosion protection
• Excellent wear properties
• Extremely low coefficient of friction
• Increases the quiet running
• Surface smoothening

Additional Information

Fully synthetic special grease free from PTFE, for long-term lubrication under extreme conditions

Use

• Typical applications are rolling and plain bearings at low speed in engineering and plant equipment ( e.g. industrial furnaces), fire protection fittings, locking systems, slideways, joints and other sliding surfaces at very high temperature.
• In injection moulding and diecasting for the lubrication of metallic surfaces (e.g. ejector pins).
• Multiple uses in high-temperature applications, if conventional PFPE greases with PTFE are not expected to create satisfying results.

Properties

• Excellent wear properties
• Resistant against chemicals and aggressive media
• Neutral to most plastics and elastomers
• Considerable extension of the re-lubrication cycles
• Temperature-stable up to +300°C
• Suitable for high loads due to new types of additives
• PTFE-free
• Economical in consumption

Additional Information:

• Fully synthetic high speed and spindle grease.

Use:

• Moreover recommended also for thread and ball spindles, linear drives and linear guidings, moving gears, toothed wheels of small gears and bearings of cable cars.

• Especially designed for lubrication of rolling and plain bearings operating at high rotational speed and/or low temperatures.

• Typical applications: spindle bearings in textile machinery and machine tools as well as small bearings and precision bearings in precision engineering applications and optical devices.

Properties:

• Reduces wear and tear
• Steady also at very high speeds
• Excellent corrosion protection
• Avoids stick-slip
• Very good low-temperature properties
• Wide temperature range
• Resistant to oxidation and ageing

Additional Information

• High performance grease for a wide application range

Use:

• For long-term lubrication at low and high operating temperatures like plain and roller bearings, joints, slides, hinges and guidings.
• Especially suited for ball bearings, not so good for roller bearings.

Properties:

• Reduces wear and tear
• Excellent corrosion protection
• Conveyable in central lubricating systems (progressive central lubricating systems excluded)
• Wide temperature range
• High speed factor
• Economical by high operational safety

Additional Information:

Media-resistant special grease with excellent wear and corrosion protection

Use:

• Heavily loaded rolling and plain bearings at medium speeds under adverse ambient influences like humidity, acids, alkalis as well as high temperatures.
• Typical applications: calenders, rollers, pumps, dryers, engines in all industrial areas and for shipping and mining
• Proven for the lubrication of tool elements like ejectors, core pullers, sliders and die-sets in plastic injection moulding.

Properties:

• Universal in use
• Very media-resistant
• Good water resistance
• Excellent corrosion protection
• Excellent wear properties
• Free from solid lubricants
• High sealing and adhering effect
• Silicone-free

Additional Information
Evaporating stamping and drawing fluid with wear-reducing synthetic additives

Use

• Drawing, deep-drawing, stamping and folding of sheets and profiles.
• Suitable for steel and nonferrous metals.

Properties

• Reduces wear and tear
• Evaporates quickly
• Evaporates without residues
• Extended lifetime of tools
• Free from heavy metals and their compounds
• Contains no chlorine
• Harmless in application and use
• Subsequent cleaning not necessary
• Paint compatible, suitable for water-based and solvent based paints
• Silicone-free

Additional Information:

White assembly and lubricating paste, especially to avoid fretting corrosion.

Use

• Assembly and lubricating paste as replacement for undesired black and metal-containing pastes.
• Ideal suited for lubrication of chucks.

Properties

• Clean application
• Avoids fretting corrosion
• Extremely adherent
• High load carrying ability
• Trouble-free disassembly
• Outstanding emergency running characteristics
• Good resistance to coolants

Additional Information

• Fully synthetic and metal-free high-temperature paste.

Use

• Against burning of bolts, screw and plug connections, flanges, seals and guide ways exposed to high temperature hinges especially in chemical and steel industry.
• Reliable in drying plants, oven, conveyors and hot gas turbines.
• Black wash for ladle and casting tools in aluminum die-casting.

Properties :

• Avoids fretting corrosion
• Temperature-resistant and lubricating effective up to + 1.000°C
• High load carrying ability
• Metal-free
• Low friction coefficient
• Not conducting
• Avoids burning /scaling

Additional Information

• Special paste for high thermal and extreme mechanical loads.

Use

• High-temperature lubricating, separating and assembly paste for all kinds of connections.
• Typical applications: extruder flanges, heat exchangers, boiler and apparatus construction, threads of nozzles, lubrication of slow running bearings under high temperatures.
• One for all / reduction of variety of products, replaces copper, nickel, MoS??? and aluminum pastes

Properties

• Highest pressure and temperature stability
• No seizing / scaling
• Excellent wear properties
• Free from heavy metals and their compounds
• Low friction coefficient
• Suitable for material pairings metal/metal

Additional Information:

• Aluminumbased general purpose lubricating and assembly paste for normal and high temperatures.

Use:

• Screw and plug connections, especially of stainless steel; sealings, flanges, guides and bolts.

Properties:

• Universal in use
• Reduces wear and tear
• Facilitates assembly and disassembly
• Temperature-stable up to +1.180 °C
• Free from lead and nickel
• Avoids burning / scaling

Additional Information

Light-coloured, highly effective assembly and grease paste on PTFE basis

Use

• Keyway profiles and other sliding surfaces in office machines, appliances, computer, optical instruments, paper machines, also for slowly running bearings.

• Lubrication of drinking water fittings and packaging machines in food industry

• Established for the lubrication of diverse lubrication points in plastic injection molding machines.

Properties

• High load carrying ability
• Excellent lubricating properties
• Extended relubrication cycles
• Metal-free

Additional Information:

• H1 multi-purpose oil for the food processing and pharmaceutical industry

Use:

• Preservation and conservation of sealing, O-rings, hinged slat or roller chains as well as any kind of drives in the whole food, pharmaceutical and cosmetic industries.

Properties:

• H1 registered
• Kosher certified
• Halal certified
• Excellent corrosion protection
• Agreeable odour
• Tasteless
• Physiologically harmless
• Transparent

Additional Information

• Fully synthetic metal working fluid for demanding operations and for universal machining of ferrous and nonferrous metals.

Use

• Fully synthetic metalworking fluid for difficult operations and for universal machining of ferrous and nonferrous metals.

Properties

• Extremely adherent
• Excellent wetting properties
• Free from heavy metals and their compounds
• Mineral oil free
• Contains no chlorine
• Free from phosphor and sulphur
• Very good wear protection
• Economical in consumption

We are offering CLEAN-Setral-SR Foam Cleaner Spray.